Combined Ops Changelog

Updates may affect DCS AOC Tools, DCS Mission Planner, DCS Airspace, or the Combined Ops platform itself. The changelog provides a chronological record of changes to the mission planning, air operations, DTC preparation and real-time ATC/GCI capabilities available through the platform.

Combined Ops Update — October 28, 2026

DCS AOC Tools

  • DCS NTTR Sat Map now available

DCS Mission Planner

  • DCS NTTR Sat Map now available

DCS Airspace

  • DCS NTTR Sat Map now available

Combined Ops Update — October 27, 2026

DCS Airspace

  • Drawings with layer names matching "ACO" are no longer displayed (the native Combined Ops ACO remains in use).
  • Revised label positioning to minimize unnecessary label movement during unit motion, as well as map panning and zooming.

Combined Ops Update — October 23, 2026

DCS Mission Planner

  • Pressing Escape now correctly cancels the drawing of DTC features.

Combined Ops Update — October 22, 2026

DCS Airspace

  • Track-Anchored BRAA: Starting a BRAA measurement with the middle mouse button on a track keeps the measurement anchored to that track.
  • Persistent BRAA: Hold Left Ctrl while starting a BRAA measurement with the middle mouse button to create a persistent, real-time BRAA between the initial track and the track under the mouse when released.

Combined Ops Update — October 21, 2026

DCS AOC Tools

  • Added Tactical AWACS Map (blue colors)

DCS Mission Planner

  • Added Tactical AWACS Map (blue colors)

DCS Airspace

  • New tactical map with realistic colors
  • New identification system, now including:
    • Friendly
    • Assumed Friendly
    • Unknown
    • Pending
    • Hostile
    • Suspect
  • New track symbology aligned with realistic AWACS standards
  • New server-side option: ATO Mode 3 Match Classification — When Realistic Identification is enabled and an ATO is available, tracks without an active Mode 4 response are automatically classified according to this setting if their active Mode 3 code matches a code assigned in the ATO: Assumed Friendly (this does not constitute confirmed identification) or Unknown. Tracks with an active Mode 4 response are always classified as Friendly.
  • Minor UI adjustments to optimize screen space

Combined Ops Update — October 15, 2026

DCS Airspace

  • Added Allow No Position Stations server option to restrict station selection to agencies with a real position in the DCS World simulation.
  • Added Allow In Map Position Change server option to prevent controllers from switching agencies while in the map, keeping their selected station and associated SRS communications position fixed.

Combined Ops Update — October 9, 2026

DCS Mission Planner

  • Fixed TOS recalculation and groundspeed calculation for manually adjusted waypoint position or fixed-TOS.

DCS Airspace

  • Added custom map views to save and restore the following settings and items:
    • map position
    • zoom level
    • map type
    • layer opacity and visibility settings
    • selected bullseye state
    • custom reference point state
  • Added Ctrl + F1/F2/F3 shortcuts to load custom map views, with a 1-second long press to save the corresponding view.

Combined Ops Update — October 7, 2026

DCS Airspace

  • Added shortcuts for quick identification:
    • F1 - Friendly
    • F2 - Hostile
    • F3 - Unknown
  • Added LOS calculation for:
    • Threats
    • Groups Commands
    • Free LOS Test (right click menu)
  • Added Elevation info in top-right panel
  • Weather and General Info moved to smaller draggable panels
  • Redesigned Map and Interface

Combined Ops Update — October 1, 2026

DCS AOC Tools

  • Improved map interaction performance and hover responsiveness.
  • Reduced lag during mouse movement.
  • Updated OpenLayers to 10.10.0.

DCS Mission Planner

  • Improved map interaction performance and hover responsiveness.
  • Reduced lag during mouse movement.
  • Updated OpenLayers to 10.10.0.

DCS Airspace

  • Improved map interaction performance during BRAA operations.
  • Improved overall pointer and hover responsiveness.
  • Updated OpenLayers to 10.10.0.

Combined Ops Update — September 12, 2026

DCS Airspace

  • Added Track Lock to keep the map centered on the selected live unit.
  • Added Auto PICTURE/PICTURE Trainer system: automatically generates Traditional PICTUREs and Core Information, filtering contacts by max range or operator-defined PICTURE Areas (ignores max range setting).
  • Added Picture Area filtering for track PICTURE generation
  • Added per-track PICTURE Area persistence in user settings
  • Added PICTURE keyboard shortcuts:
    • P: request Traditional PICTURE
    • Ctrl + P: request Core Information
    • Alt + P: open PICTURE settings
    • Space (Hold) + LMouse: draw selected track's Picture Area
    • Ctrl + C: delete selected track's Picture Area
    • Ctrl + Space + C: delete all track's Picture Areas
  • Added H indicator for tracks identified as helicopters
  • Reworked and reorganized the left-side menu
  • Increased track label font size
  • Scheduled/Controlled Panels: the selection button no longer selects the unit's flight plan; it now centers the map on the unit if it is already present on the map.

Combined Ops Update — September 9, 2026

DCS AOC Tools

  • ATO: Updated DEPLOC/ARRLOC handling and takeoff/landing waypoint identification. See the Wiki for detailed information on the supported waypoint naming conventions.

Combined Ops Update — September 8, 2026

DCS Mission Planner

  • F/A-18C DTC: 
    • Added TACAN Partition
    • Added Default Programs section to CMDS Partition
    • Added TOO Threat Classes Manager to HARM Partition

Combined Ops Update — September 7, 2026

DCS Mission Planner

  • Added terrain elevation profile to the Flight Profile chart, with waypoint distance labels and automatic altitude scaling.
  • F-16C DTC:
    • Added ROE Partition
    • Added Default Programs section to CMDS Partition

Combined Ops Update — September 4, 2026

DCS AOC Tools

  • Frequency Conflict Prevention: Intraflight frequency generation now automatically excludes frequencies already assigned in the mission's C2 controls, including both main and alternate frequencies (it is recommended to regenerate the Intraflight frequencies after completing the C2 setup, to ensure that no frequency conflicts occur).

DCS Airspace

  • Fixed an issue that prevented some Groups of Responsibility from being reset when deleted.
  • Added Aircraft Approach Category to the label selectable information.

Combined Ops Wiki

  • Added: DCS Airspace > Radar Display Symbology

Combined Ops Update — September 3, 2026

DCS Mission Planner

  • AH-64D DTC: Added support for:
    • Areas
    • No-Fire Zones (NFZs)
    • Priority Fire Zones (PFZs).

Combined Ops Update — September 2, 2026

DCS Mission Planner

  • AH-64D DTC: Added Lines partition.
  • F-14B(U) DTC: Added JDAM partition support (manual launch point configuration is not yet available).
  • Fixed an issue where DTC files provided DCS with local times instead of UTC (Zulu) time.
  • Added a map loading progress bar to prevent interaction until the map is ready.

Combined Ops Update — September 1, 2026

Combined Ops Platform

  • Added the ability to search for groups by country.

DCS Mission Planner

  • Fixed several bugs related to page loading.
  • Added the first part of the DTC Manager for the AH-64D:
    • Flight Plan
    • CTRLM
    • TGT/THRT

Combined Ops Update — August 26, 2026

DCS Mission Planner

  • Added waypoint selection animation for improved visual feedback during flight plan editing.
  • Added manual Time on Steerpoint (TOS) control for individual waypoints. Setting a manual TOS automatically recalculates the required ground speed to meet the specified time.
  • F-16C DTC: Added COLOR DTC Partition Editor.

Combined Ops Update — August 21, 2026

DCS Mission Planner

  • Added initial MiG-29A Fulcrum DTC support.
    • Added DTC Points configuration.
    • Added DTC Waypoints configuration.
    • Added Route data generation.
    • Added Radio Settings configuration.
    • Added CMDS configuration.
    • Added Weapon Settings configuration.
    • Added Target Waypoint support using the first waypoint marked as a target in the flight plan.

Combined Ops Update — August 8, 2026

DCS Mission Planner

  • Added F-14B(U) DTC:
    • Flight plan
    • Additional points
    • Lines
    • CMDS
    • TIS

Combined Ops Update — August 3, 2026

DCS Mission Planner

  • Added MDC Editor: allows to fill MDC notes areas.

Combined Ops Update — July 30, 2026

DCS Mission Planner

  • F/A-18C DTC: COM1 and COM2 can now be used interchangeably to enter UHF or VHF frequencies.
  • DTC: Users can now save up to 5 custom DTCs. These DTCs remain permanently available and can be loaded provided that the selected aircraft and theatre match those of the DTC being loaded.

Combined Ops Update — July 25, 2026

DCS Airspace

  • Added SRS Client control panel: You can now control SRS directly from DCS Airspace (requires Combined Ops Link to be running and connected to the SRS Server). For more info see wiki.combinedops.org

Combined Ops Update — July 24, 2026

DCS Mission Planner

  • F/A-18C: Added HARM Settings to DTC Editor page.

Combined Ops Update — July 22, 2026

DCS Mission Planner

  • F/A-18C: Enabled DTC PT's - 200 additional waypoints may be created in the DTC file that will be imported to the DTC GPS WYPT Partition.
  • F-16C: VIP and VRP are now exported to DTC when enabled and set.

Combined Ops Update — July 21, 2026

DCS Mission Planner

  • In Mission Planner, waypoints for the Hornet now start from 1 instead of 0, making it fully compatible with DCS, which doesn't count WP 0 in its DTC editor.

Combined Ops Update — July 7, 2026

DCS Mission Planner

  • Fixed: waypoint TOS was not correctly exported in F-16C DTC.
  • Fixed: minor issues on DTC export for F/A-18C.
  • Fixed: some agency types were not displayed in the missions list.
  • F/A-18C: The DTC now exports the flight plan's set altitude to both the waypoint list and the route sequence.

Combined Ops Update — June 30, 2026

DCS Mission Planner

  • Added to F/A-18C DTC:

    • MEZ Rings

    • CAP Points

    • Corridors

    • FAOR

    • FLOT

    • NAV Options (DTC Editor page)

    • SA Options (DTC Editor page)

  • Improved the DTC-related top menu

  • Modified the style of corridors (ACO), adding a dashed centerline

Combined Ops Update — June 23, 2026

DCS Mission Planner

  • In preparation for expanding DTC management to aircraft other than the F-16C, flight plan and DTC imports are now restricted to matching aircraft types only.

Combined Ops Update — May 21, 2026

DCS Mission Planner

  • Added labels to DTC Points
  • F-16C: Lines, Points and Threats added to DTC (downloaded in .dtc file)

Combined Ops Update — May 11, 2026

DCS AOC Tools

  • Changed waypoint and DTC numbering to start at 1 or 0 according to the selected aircraft.

DCS Mission Planner

  • Changed waypoint and DTC numbering to start at 1 or 0 according to the selected aircraft.

DCS Airspace

  • Changed waypoint and DTC numbering to start at 1 or 0 according to the selected aircraft.

Combined Ops Update — April 17, 2026

DCS Airspace

  • Added: option to show air units altitude in feet (checked) or FL (unchecked).
  • Labels rows items (subject to change):
    1. Emergency indicator (Red EM) (when active)
    2. Callsign + Mission Number
    3. Altitude + Ground Speed
    4. A/C Type + A/C Category + IFF Mode 3 and 4
    5. Position from Bullseye or Ref Point 

Combined Ops Update — April 15, 2026

DCS Airspace

  • Units Labels Logic: Completely rewritten the label generation logic for Air, Ground and Naval Units. Labels now dynamically adjust their positioning to minimize overlapping with other labels or radar plots, ensuring better legibility in crowded airspace.
  • IADS Command Visibility: The opacity of IADS Group Commands is now linked to the Threats Opacity slider, allowing for more granular control over UI clutter.
  • Intercept Geometry: Resolved an issue that prevented the calculation of the Cut-off intercept route. The system now correctly computes the lead pursuit vector for target engagement.

Combined Ops Update — April 11, 2026

DCS Airspace

  • Restored proper functioning of the NumPad 1 shortcut.
  • Added: white dashed circles to Air Defense Group Commands.
  • Fixed: issue where IRIS-T SLM LN engagement circles were not displayed correctly.
  • Fixed: issue where air units were filtered by type even if unknown.

Combined Ops Update — April 2, 2026

DCS Mission Planner

  • Exports to DCS-DTC have been updated to version 9.3.1. Previous versions are no longer supported.
  • A-10C II flight plan and radio settings are now available for DCS-DTC export.

Combined Ops Update — March 27, 2026

DCS Airspace

  • System-Wide ID Sync: Automatic identifications are now stored in the database. Units will remain identified even if the pilot deactivates onboard systems (e.g., IFF).
  • Visual Symbology: Tracks identified via system-stored data are now displayed with an unfilled, non-dashed hollow symbol (circle, square, or triangle) to distinguish them from real-time sensor hits.

Combined Ops Update — March 25, 2026

DCS Airspace

  • Added: altitude trend arrows next to altitude label
  • Fixed a problem on human units identification

Combined Ops Update — March 23, 2026

DCS AOC Tools

  • Added elevation data for Syria map
  • Fixed an issue that prevented correct Line of Sight (LOS) calculations.
  • Improved bearing and heading calculations to perfectly align with DCS World standards.

DCS Mission Planner

  • Added: elevation data for Syria map
  • Added: Set VIP, VRP, and OA points directly via map click.
  • Added: MGRS format is now available on Coords Format select on the top menu. While full implementation is ongoing, it now enables MGRS coordinates display in areas previously unsupported, including MDCs.
  • Fixed an issue that prevented correct Line of Sight (LOS) calculations.
  • Improved bearing and heading calculations to perfectly align with DCS World standards.

DCS Airspace

  • Added Real Mode: In this mode, all contacts are initially displayed as UNKNOWN. Identification can be achieved through several methods (see Wiki).
  • DCS Mode: The legacy identification system is now DCS Mode, where all units are identified exactly as they appear on the DCS F10 map.
  • Server-Side Integration: DCS Mode and Real Mode settings are now managed server-side and can be toggled via the DCS Airspace server settings.
  • New Server-Side Options:
    • Server Realism Level
    • Friendly AI Air Units Identification
    • Show DCS World Player Name
  • IDENT Command: Added support for the aircraft "IDENT" command.
  • Emergency Squawks: Added dedicated visual indications for emergency transponder codes 7600 (Radio Failure) and 7700 (General Emergency).
  • Updated Symbology: UNKNOWN contacts are now represented by a yellow square symbol.
  • Disabled INFO button for not friendly tracks.
  • New BRAA Tool on mouse middle button.
    • Removed Ruler BRAA Mode (Ctrl+Alt+LeftClick)
  • Track Labels:
    • Every label item can now be individually shown/hidden.
    • Bullseye name removed from track labels.
  • Mission Info are now shown if server realism mode is DCS or if identification criteria are met.
  • Mission Flight Plan is now shown if server realism mode is DCS or if id criteria are met.
  • Track of Interest are now marked with an enclosing circle around the original symbol, regardless of their coalition
  • Improved bearing and heading calculations to perfectly align with DCS World standards.
  • Bug Fixes: Resolved several minor issues and improved system stability.

Combined Ops Update — March 13, 2026

DCS AOC Tools

  • Full PDF: added General Info and Coalition General Info

DCS Mission Planner

  • Project Dashboard: added General Info and Coalition General Info
  • Full PDF: added General Info and Coalition General Info
  • F-16C: Geo Lines 1 and 2 are now exported to Route 2 and 3, provided there are sufficient remaining waypoints.

DCS Airspace

  • Full PDF: added General Info and Coalition General Info

Combined Ops Update — March 12, 2026

DCS Mission Planner

  • DTC Support: Initial implementation of Data Transfer Cartridge (.dtc) file export for F-16C and F/A-18C.
    • Navigation Data (F-16C): Support for Flight Plan, VIP, VRP, OA1, and OA2.
    • Navigation Data (F/A-18C): Support for Flight Plan and OA.
    • Radio Settings: Automated export of radio presets for both F-16C and F/A-18C.

Combined Ops Update — March 8, 2026

DCS Airspace

  • Fixed: Mouse tooltip now correctly hides when the cursor leaves the map area
  • Added button to cancel all tracks warnings (WRNG)

Combined Ops Update — March 2, 2026

DCS AOC Tools

  • Added: Manual Line of Sight (LOS) tool. You can now test LOS from any location on the map without a pre-existing unit (Right-click > Test LOS).

DCS Mission Planner

  • Added: Manual Line of Sight (LOS) tool. You can now test LOS from any location on the map without a pre-existing unit (Right-click > Test LOS).

Combined Ops Update — February 23, 2026

DCS AOC Tools

  • Fixed ACO features visibility sync issue where map settings were being overwritten by initial style loading.
  • Added Line of Sight (LOS) calculation for ADS using SRTM1 elevation data extracted directly from DCS World for full simulator consistency.

DCS Mission Planner

  • Added Line of Sight (LOS) calculation for ADS using SRTM1 elevation data extracted directly from DCS World for full simulator consistency.
  • Added a filter projects by group option in Projects Dashboard.

Combined Ops Update — February 20, 2026

DCS Airspace

  • Air Units Filtering: Added filter by unit category (Attack (A), Fighter (F), etc.)
  • Fixed an issue preventing the Bullseye from displaying on the cursor at startup

Combined Ops Update — February 15, 2026

DCS AOC Tools

  • Projects List: Added filename to project list for better navigation

Combined Ops Update — February 14, 2026

DCS Airspace

  • Measuring tool enhancement:

    • Restructured measuring tool when BRAA mode (ALT + CTRL) is active to restrict measurements to a single segment.

    • Enabled map panning while measuring.

    • Help Tooltip is now limited to normal Measurement Tool and is hidden when BRAA mode is active

    • Disabled the Context Menu (right click) while measuring to avoid UI conflicts.

Combined Ops Update — February 11, 2026

DCS Mission Planner

  • TOLD: Added Takeoff Roll Trim with Asymmetric Stores (F-16C only)

DCS Airspace

  • New BRAA Mode Shortcut: Added CtrlLeft + AltLeft + Mouse interaction. While measuring (AltLeft), holding CtrlLeft activates BRAA mode, rounding bearing and range values. When hovering over an air unit, the tool dynamically displays its altitude and aspect angle.

Combined Ops Update — February 3, 2026

DCS AOC Tools

  • Fixed opacity handling for "Icons" drawing features.

DCS Mission Planner

  • Added magnetic variation support: headings are now calculated using the latest available IGRF-14 geomagnetic data. Users can toggle between TRUE (T) and MAG (M) modes via Map Options.
  • Added waypoint headings: flight plan waypoints now display heading information when selected.
  • Fixed a flight plan deletion bug: resolved an issue that caused application instability or calculation errors after clearing the current flight plan.
  • Fixed opacity handling for "Icons" drawing features.

DCS Airspace

  • Fixed opacity handling for "Icons" drawing features.
  • Germany Cold War theatre: Enabled PAR (Precision Approach Radar) for the following airbases:
    • Spangdahlem
    • Ramstein AB
    • Leipzig Mockau
    • Laage
    • Norvenich
    • Buchel

Combined Ops Update — January 30, 2026

DCS Airspace

  • Added a button to clear Favorites layer in one click
  • Added the following shortcuts
    • Shift + F: add selected feature to Favorites
    • Ctrl + F: remove selected feature from Favorites
    • Ctrl + Shift + F: remove all features from Favorites

Combined Ops Update — January 25, 2026

DCS Mission Planner

  • Flight Plan: Fixed a problem in waypoint auto terrain elevation selection

DCS Airspace

  • Updated cursor tooltip: Now displays BULLSEYE or REF PT information by default. Hold Left CTRL to show the ACM name under the cursor. Track information always takes precedence over other data.

Combined Ops Update — January 24, 2026

DCS AOC Tools

  • Fixed an issue with orbit points calculation

DCS Mission Planner

  • Fixed an issue with orbit points calculation

DCS Airspace

  • Added sound for:
    • New Red Track
    • New Blue Track
    • Lost Red Track
    • Lost Blue Track
  • Added Volume slide control
  • Fixed an issue with orbit points calculation

Combined Ops Update — January 22, 2026

DCS AOC Tools

  • Top and Side bar menu reworked.

DCS Mission Planner

  • Comms page (radio settings) moved from Comm Plan to DTC page.
  • Removed CMDS page. It will be added to DTC page.
  • Top and Side bar menu reworked.

Combined Ops Update — January 3, 2026

DCS Mission Planner

  • Fixed an issue that occasionally prevented group members from opening missions in the DCS Mission Planner.

Combined Ops Update — December 24, 2025

DCS Mission Planner

  • Added DTC Geo Lines. User can create, edit and delete Geo Lines. 
  • Geo Lines are shared with the same code of the flight plan. When imported, your previous Geo Lines will be deleted.
  • FPL button now select the user's flight plan.
  • DTC File for DCS-DTC can be downloaded and now includes Geo Lines within flight plan waypoints separated by an empty waypoint. This workaround allows to show some Geo Lines on MFD.
  • Added Option and Symbology for Initial Point and Target waypoints.
  • For F-16C50, added waypoint VIP, VRP, OA1 and OA2 settings and export for DCS-DTC.
  • Added bearing to measuring tool.
  • User's map settings are now saved and loaded on next session

Combined Ops Update — November 27, 2025

DCS AOC Tools

  • DCS Elevation Data (SRTM1, 30 meters) for Caucasus, Germany Cold War, Marianas, NTTR, Persian Gulf, Sinai and Syria. More theatres will be available.
    • Map shows elevation data at top-right corner
    • Added copy elevation to context menu
  • Copy coordinates in context menu now shows coordinates 
  • Introduced DCS World Sat maps where available (GermanyCW only at this moment)
  • DCS World maps are now default maps where available
  • In the ACO page, added selection for ACM's labels type (normal, name only and none)

DCS Mission Planner

  • DCS Elevation Data (SRTM1, 30 meters) for Caucasus, Germany Cold War, Marianas, NTTR, Persian Gulf, Sinai and Syria. More theatres will be available.
    • Map shows elevation data at top-right corner
    • Added copy elevation to context menu
  • Copy coordinates in context menu now shows coordinates 
  • Introduced DCS World Sat maps where available (GermanyCW only at this moment)
  • DCS World maps are now default maps where available
  • In flight plan edit mode, added a checkbox to insert terrain elevation in waypoint when checked
  • Added selection for ACM's labels type (normal, name only and none)

Combined Ops Update — September 10, 2025

DCS Mission Planner

  • Fixed Upload Your Mission feature

Combined Ops Update — August 25, 2025

Combined Ops Platform

  • Added airfields in Cold War Germany theatre (icons and runways information not complete)
  • Added some local nav points near Ramstein AB

DCS AOC Tools

  • Added Project Availability and Permissions section in Project Dashboard
  • Improved the features selection context menu

DCS Mission Planner

  • Improved the features selection context menu

DCS Airspace

  • Added host group logos to servers list
  • Added Map Options > Labels controls for:
    • Threat Circles
    • Airfields/Beacons
    • Local Nav Points
  • Added Airfields/Beacons opacity control
  • Added Commands for Ground and Naval Groups:
    • Group Active
    • Group ROE
    • Group Alarm State
  • Added grouping to the feature selection menu
  • Added Threat Circles Labels Normal or None selection in Map Options
  • Added Threat Circles for naval units
  • Added Air Unit Targeting: You can now select a friendly track and "target" an enemy one. A real-time connection line will appear on the map. The targeted symbology will be visible to all connected users. 
    If another user in your session targets a track, the same symbology will be shown with a "L" next to the target track. 
    By hovering the mouse over the "L" symbol of a target track, a tooltip will appear showing an "L" followed by the callsign of the control agency that performed the targeting. 
    Added shortcuts for quicker control:
    • Key Q (Hold) + LMouse: if a track is selected, click on another track to show/hide Targeted symbology
    • Ctrl + Key Q: Cancel all Targeted symbology from selected track
    • Ctrl + Shift + Ke yQ: Cancel all Targeted symbology from all tracks
  • Added Air Units Filtering system, allowing tracks to be filtered based on altitude and ground speed. If a track hidden by this filter is linked to a still visible track via BRAA or targeting functionalities, it will be shown as a dashed line. These dashed tracks are not selectable, and hovering the mouse over them will show their altitude and callsign (for friendly units only).
    Added shortcuts:
    • Key R: Show/hide Air Units Filters panel (toggle)
    • LCtrl + Key R: Reset all Air Units Filters
  • Added Groups of Responsibility feature. You can now add an entire group by selecting one of its tracks and clicking the RESP button or using the keyboard shortcut. Groups you add appear in green for the Blue coalition and yellow for the Red coalition. They are shared and visible to all connected users. Other users' responsibility groups will show the same colors, but the plot will be empty. When hidden by filters, your own groups will be dashed, while other users' groups will be completely hidden. 
    Shortcuts added:
    • Key S (hold) + Mouse Left: click on a track to add its group
    • Ctrl + S: Remove all user's groups of responsibility
  • Added Tracks of Interest feature. You can now add tracks of interest by selecting an air track and clicking the INT button or using the keyboard shortcut. Tracks you add appear highlighted with a circle. Tracks of Interest are not shared and visible to all connected users. When hidden by filters, your own tracks of interest will be dashed.
    Shortcuts added:
    • Key D (hold) + Mouse Left: click on a track to add
    • Ctrl + D: Remove all user's Tracks of Interest
  • Added shortcuts for tracks and labels visibility:
    • NumPad 1: Switch through visibility options of air tracks and labels
    • NumPad 2: Switch through visibility options of ground tracks and labels
    • NumPad 3: Switch through visibility options of naval tracks and labels
  • Added shortcuts for map layers opacity:
    • Digit 1: Set Map brightness to 0 or previous value (toggle)
    • Digit 2: Set Favorites opacity to 0 or previous value (toggle)
    • Digit 3: Set ACO opacity to 0 or previous value (toggle)
    • Ctrl + Digit 3: Switches through ACO labels settings
    • Digit 4: Set Threats opacity to 0 or previous value (toggle)
    • Ctrl + Digit 4: Switches through Threats labels settings
    • Digit 5: Set Airfields/Beacons opacity to 0 or previous value (toggle)
    • Ctrl + Digit 5: Switches through Airfields/Beacons labels settings
    • Shift + Digit 5: Switches through Local Nav Points labels settings
    • Digit 6: Set Drawings opacity to 0 or previous value (toggle)
    • Digit 7: Set Flight Plans opacity to 0 or previous value (toggle)
  • Clicking the Map Options button now toggles the visibility of the Map Options panel
  • Map Options are now saved for next sessions
  • ADS Group Threat Circle Display Logic Rework
    • Enemy SAM Threat Circles: Threat circles for enemy Air Defense System (ADS) groups are now initially displayed if the groups are active, have all necessary accessory units (e.g., TR unit), and are configured to be visible in the .miz file, if uploaded in DCS AOC Tools. If these conditions are not met, threat circles become visible only upon detection by friendly units. Currently, once a threat circle is visible, it remains visible even if its associated unit is damaged or destroyed.
    • Friendly SAM Threat Circles: Threat circles for friendly ADS groups now accurately reflect their real-time operational status. A friendly SAM unit's threat circle will only be displayed if the unit is active and its group includes all necessary accessory units (e.g., a tracking radar unit) to be considered fully operational. Friendly Threat Circles now dynamically change color to light grey or blue, reflecting their group's real-time operational status
  • Air tracks plot size increased
  • Red coalition air tracks plots are now displayed as triangles rotated to the track's heading
  • Fixed: Fixed: Alt key no longer opens Firefox menu
  • Fixed: error loading initial PAR info when saved from a session on a different theatre
  • Fixed: Scheduled panel not opening
  • Fixed: The measurement tool now calculates the exact magnetic variation at the endpoint when MAG is selected. 
  • FIxed: DCS Server Paused message not always showing
  • Fixed: The TGT, BRAA, and C/O buttons cancel the interaction if pressed a second time without selecting a track

Combined Ops Update — July 25, 2025

DCS AOC Tools

  • New Project Dashboard
  • When the ACO is opened for the first time, you are prompted to fill in and save the ACO header form
  • Clone ACM button now also clones coordinates and auto select the new ACM
  • Added confirmation prompt for Clone ACM and Delete ACM buttons
  • Now if the miz bullseye is not included in the ACO, you are asked if you want to import it
  • If the miz bullseye is already included in the ACO but coordinates are different, you are asked if you want them to be automatically corrected
  • Fixed: If you clicked outside the map when the feature selection menu was open, the menu was not closing correctly
  • In the ATO page, when ATO Header does not exist, it shows the message "Set ATO Header and save to unlock all the ATO features"

DCS Airspace

  • Now the server bullseye is imported only if it's not already included in the ACO created in AOC Tools, or if it is included but the coordinates are different; the default name assigned to the server bullseye at this time is BULLSEYE (SERVER). If the server bullseye is already included in the ACO with its coordinates, it won't be imported
  • Fixed: If you clicked outside the map when the feature selection menu was open, the menu was not closing correctly

Combined Ops Update — July 19, 2025

DCS Airspace

  • Airfield scheduled missions table is now dinamically generated for default airbase or selected airbase, missions are sorted by takeoff time and callsign (requires mission to be included in a task unit with the correct ICAO code and one waypoint name to include "TAKEOFF" in DCS flight plan or DTC flight plan to calculated takeoff time)

Combined Ops Update — July 18, 2025

Combined Ops Platform

  • Cold War Germany: added default local nav points
  • Cold War Germany: added beacons
  • Cold War Germany: added default areas and points (import in AOC Tools)

DCS AOC Tools

  • Context menu in alphabetical order

DCS Mission Planner

  • Context menu in alphabetical order

DCS Airspace

  • Context menu in alphabetical order
  • Added ACO Labels Type selection (Normal, Name Only, None)

Combined Ops Update — July 16, 2025

DCS AOC Tools

  • Fixed map not loading default local nav points
  • Context menu in alphabetical order

DCS Mission Planner

  • Fixed map not loading default local nav points
  • Context menu in alphabetical order

Combined Ops Update — July 12, 2025

DCS AOC Tools

  • Added context menu for feature selection
  • Removed Bing maps
  • Added shortcut: Escape to unselect and/or close context menu

DCS Mission Planner

  • Added context menu for feature selection
  • Removed Bing maps
  • Added shortcut: Escape to unselect and/or close context menu

DCS Airspace

  • Fixed Controlled Panel not showing related missions controlled

Combined Ops Update — July 3, 2025

DCS Airspace

  • Threat circles dinamically downloaded and updated from server mission
  • Map options: added option "BRAA shows AA brevity"